Affordable Kitchen Cabinets Richmond VIC


If you’re considering a kitchen remodel, Renovation or new, we can provide the best and trusted tips and advice for your project or renovation. Learn more about kitchen design and material options from Daryl at Darbe Cabinets.

Modern Kitchen Designs And Trends

Our world is frequently changing, and changing with it is always difficult. Bold traits of those who always search and explore new ways and solutions, for kitchen designs that does not follow trends, but rather sets the trend with innovation.
We at Darbe Cabinets will always offer modern solutions that are also practical and embrace the end user.

We carefully select only the industry best materials and surfaces to provide our clients and customers quality and a finish that both we and you will be proud of.
Each vendor is hand selected for a particular fit within our variety, quality, pricing, and customer request.

We at Darbe Cabinets appreciate and take every project seriously, no matter the cost we provide the same attention to detail and oversight to ensure the result is a job well done and exceeds your expectations.

Our services and scope of works for each project from design, purchase, build, delivery, installation, and even the maintenance phase is delivered without any fuss and pride.  Choose Darbe Cabinets and choose excellence.

Kitchens can be the most expensive and complicated room to renovate in your home, an average project costs upward of $20,000 and takes around eight weeks to complete, so ask all the right question when looking for the right contractor, and remember we are here to help – call Daryl on 0419 138 025

Darbe Cabinets are a kitchen cabinet makers situated in the eastern suburbs of Melbourne. We make cabinets to meet your personal requirements. Using only the best hardware and material available to make your project come to life. We control costs by remaining a small business but with high standards. We provide a free on-site measure and quote or from your dimensioned floor-plans.

  • Kitchen
  • Bathrooms
  • Outdoor Areas
  • House Boats
  • Laundries
  • Vanities
  • Architectural
  • New homes & Renovations
  • Over 30 years experience

Darbe Cabinets specialise in the following materials: Caesar Stone, Marble, Granite, Laminate, Timber, Vinyl, and Imperite (2 pack).

Call for any enquiries 0419 138 025 or 9723 8904

Caesar Stone

Caesarstone® engineered stone surfaces are a smart and more modern alternative to products such as marble and granite for kitchen bench tops and splashbacks as well as bathroom vanities and wall linings. The Caesarstone® product range offers a contemporary approach to kitchen design and renovations while maintaining the quality and luxury that consumers have come to expect from this category.


Marble is a non-foliated metamorphic rock composed of recrystallized carbonate minerals, most commonly calcite or dolomite. Geologists use the term “marble” to refer to metamorphosed limestone; however stonemasons use the term more broadly to encompass unmetamorphosed limestone. Marble is commonly used for sculpture and as a building material.


Granite is one of the most beautiful varieties of stone in the world today. It is an ageless, yet always contemporary, and stylish look. Granite is produced in many countries around the world. Companies like Gran-Marbello International import and refine granite making it appeal to prospective customers. When designing kitchen interiors, granite is often preferred over other materials because of its strength.  It does not scratch as easily as marble and it is easily cleaned. Marble is durable and comes in a gloss or hammered look but it costs more and is less hardy so people tend to prefer to use granite for their bench tops and high use areas of their kitchens. Granite is harder in structure than marble and has a different look. There is a much tighter pattern in granite than in marble. There are, however, some superior types of granite that cost as much as marble but look like marble without being as fragile.


Laminate is primarily made from a combination of kraft paper (similiar to brown paper bags), melamine and phenolic resins (a combination of phenols, melamine and formaldehyde) and high quality print paper (this is where the image or print is printed on). These layers of paper and resin are fused together under heat and pressure and the end result is laminate. Laminate is available in an array of differing surface textures. You can have a glossy, satin, matt, or textured surface. Laminates that have a glossy surface tend to show scratches very easily (they are usually recommended to be used in vertical applications) and should be avoided in horizontal applications such as benchtops. Laminates with a textured surface are favoured for benchtops as scratches are less easily seen (due to the way light is scattered on the textured surface). Deeply textured surfaces should be avoided as it is often difficult to remove grease and dirt that can get trapped. Laminate benchtops are very tough and durable. They will give you many, many years of service if looked after correctly. It will not take kindly to heat and will blister and break if a hot saucepan is placed on its surface. Sharp knives will cut into the laminate surface and once this is done it cannot be repaired. Always use a trivet or surface protector when putting hot saucepans on the bench and likewise use a cutting board when using knives for cutting.


Timber benchtops are warm to touch and will age beautifully with time.Solid timber bench tops are a great choice as they are as resilient and durable as they are attractive. The range of timbers available means that you’re sure to find one to create the look that you have in mind.To protect the surface, the timber benchtop is either sealed with polyurethane or wood oil. Polyurethane usually gives a higher gloss finish, is more durable and requires less maintenance than an oiled timber benchtop. Solid timber bench tops have stood the test of time due to their strong, sturdy nature and their ability to sit comfortably with any décor, from contemporary to traditional, but there are lots of reasons to opt for timber.

  • It is hard wearing
  • A wide choice of timbers available
  • Compatibility with various finishes
  • Mid range maintenance
  • Character and versatility

Solid timber bench tops have remained popular with kitchen designers due to their versatility. One of the advantages with timber is that it can be shaped to suit any application and with its natural good looks and warmth of character, timber has managed to hold onto its timeless appeal.


A vinyl wrap door is one where the door is made up of an MDF panel that has been cut, routed and profiled as desired and then glued and covered with a vinyl form that is pressed to the door using heat and vacuum. The back of the door is usually pre-laminated.  Vinyl wrapped doors have no joints as the vinyl goes all the way around the door

Imperite 2 Pack

Imperite is a highly decorative and durable two pack gloss urethane topcoat for the decoration and protection of interior and exterior surfaces. Ideal for use where bright colours and outstanding colour and gloss retention are to be anarchitectural feature. Excellent resistance to a wide range of chemicals, solvents and salt solutions. Extremely durable topcoat, resists marring and scuffing.